HRD -> QRZ Connection

The following screen shots show the steps to "connect" HRD and QRZ to enable call sign lookup.

Go to HRD Logbook and select Configure from the main menu and then click on Callsign Lookup from the pulldown.

When you click on Callsign Lookup, the following dialog box will appear.  Select QRZ.com Subscription on the right hand side.

Now click on the "less than symbol" as shown below.

This will add QRZ.com Subscription to the "Enabled Methods:" as shown below.

The final step is to be sure you provide the login information on the "Lookup Options" tab as shown below.

For those of you who try this, let me know how it works.  I'm good in QRZ.
73,
Carl

Morning on the Mountain

W4UOA Office Plan

Carl's Office

South view.  Work bench and cabinets.

North view.  Radio rack, deck for monitors, 

leather chair, side table and wooden file cabinet.

ACOM 600

View the ACOM 600 Operating Manual here.

New ground plain on vertical

Talk tower at the Cottage

ParaCommandos

http://alabama.247sports.com/Bolt/Point-of-View-Video-Paracommandos-fly-into-Bryant-Denny-Stadium-33007262

Knowledge Base

http://www.clickonf5.org/7599/10-free-opensource-wiki-software-engine/

Current Op Pos

Protecting connectors

There are several schools of thought on how to best protect connectors that will be exposed to heavy weather.  I recommend 3M Scotch 88 electrical tape.  The connector shown below has been in the Mentone weather two years.  Freezing winters and hot summers.

I'm addition to the fact it does provide excellent protection against all weather elements, it can be easily removed by carefully slicing open the wrapping with a sharp knife. The result is a clean reusable connector with no residue.

Re: Huntsville Bearing from Mentone

Carl,

Check www.titantv.com for detailed program listings of broadcast stations. That may help you to determine which channels to pursue.

During my earlier searching for digital TV stations I collected the following 3 links for range and bearing info:
Antennapoint
Antennaweb
TV Fool

I think you are using one of them.

I also found this FCC site for reception maps:
DTV Reception Maps

Happy Hunting!

John

On Mon, Nov 3, 2014 at 6:26 PM, Carl Ferguson <carleferguson@gmail.com> wrote:

Notice that Chattanooga is move than 90 degrees off to the north.  It will be on the side of the antenna at best.

I'm thinking now that I need to just go for Huntsville.  Not sure if there are any Chattanooga channels that I 

would like.  Help?  Thoughts?  Ideas?

Huntsville Bearing from Mentone

Notice that Chattanooga is move than 90 degrees off to the north.  It will be on the side of the antenna at best.

I'm thinking now that I need to just go for Huntsville.  Not sure if there are any Chattanooga channels that I 

would like.  Help?  Thoughts?  Ideas?

Vandy Students at The Park

State Park WiFi

I think I'm going to move to the State Park!!