Starting to return to normal!

Today is cleaning day!

Well...here it is....

Morning on the mountain

I put a little paint on last night. Hope to make a run to the finish
line today. Fall is coming to north Alabama.

Ready for final painting

Final Trim Work to be Done

The wall trim needs to be installed here. I have to cut a rabbit

in the wall on the left side to accept the trim board. The second image,

shows how this is done. I will come back later and do the same for the

base cabinets.

Progress on Wall to Wall

I will do final sanding today and final painting. Will probably install equipment
tomorrow. Need to give final painting a chance to really dry.

Base and Wall Units Installed

The wall units installed. The shelf units are screwed to the south wall and to each other. Next step is trimming out; caulking and filling; touch up painting; drilling shelf holes; and trimming shelves to length. I cut the shelves about 1/8 too long to allow for a little play as unit goes together.

Access Holes on Wall to Wall

 
 
 
 
 
 
 

First Shelf Unit Under Construction

 
 
 
 
 

New Software Project

You have to keep dreaming.... This is an FT-2000 RC
program currently under development. The intention
is to produce a compact version of FT-2000RC that
does not try to reproduce the totally look and feel of
the rig face but give the user access to all the rigs
functions using a point, click, and slide GUI. I have no
idea if it will every reach final development but it's fun to
think about what it might look like. Comments always
welcome.

Cabinet painted!

I'll start the drawers this morning. Will probably not finish draws until this weekend. We're off to Nashville tonight and Tuscaloosa tomorrow. Back on the mountain Friday.

 
 

FT Payne airport below minimums this morning!

 
 
 
 

FT-2000RC New Release

Survey results are in!

Ready for assembly!