Alabama QSO Party 2012

Alabama QSO Party (AQP) 2012
Suggested HF Frequencies
ref v.09/03/11
160 METERS				20 METERS
Mobile	CW	1.800-1.810		Mobile	CW	14.025-14.035
Non-Mobile	CW	1.810 CENTERED AROUND		Non-Mobile	CW	14.045 CENTER
Mobile	PH	1.800-1.810		Mobile	PH	14.225-14.235
Non-Mobile	PH	1.865 CENTER		Non-Mobile	PH	14.250 CENTER
80 METERS				15 METERS
Mobile	CW	3.525-3.535		Mobile	CW	21.025-21.035
Non-Mobile	CW	3.545 CENTER		Non-Mobile	CW	21.045 CENTER
Mobile	PH	3.800-3.810		Mobile	PH	21.275-21.285
Non-Mobile	PH	3.855 CENTER		Non-Mobile	PH	21.300 CENTER
40 METERS				10 METERS
Mobile	CW	7.025-7.035		Mobile	CW	28.00-28.010
Non-Mobile	CW	7.045 CENTER		Non-Mobile	CW	28.045 CENTER
Mobile	PH	7.175-7.185		Mobile	PH	28.300-28.310
Non-Mobile	PH	7.230 CENTER		Non-Mobile	PH	28.450 CENTER
www.alabamaqsoparty.org
QST Frequency chart, June , page 67
Prepared by W4BXI

FTDX-3000

See http://www.radiocronache.com/2012/05/p4020/ for more details.

Coffee Club in Lab

Morning on the Mountain

New power distribution!

Stone border project finished....

Another Mentone Mountain Creature!

"Too many devices on a power strip?"

"Multiple power strips connected to the same electrical outlet?"

"New" Op Pos

ARRL Internet Remote

Please see Steve Ford's new book!

Mountain Wild Life

I need help identifying this young snake.  He/she is about 5 inches long.
He is in captivity until I get a good guess on family.

WA5MLF Patch Configuration

DTS-4 Control Program Now Available

The LDG Electronics DTS-4 antenna switch can be controlled via a COM port from a local computer.  A functional control program is available for download at:

https://www.dropbox.com/s/9lsszp3gchyanjt/DTS-4.zip?dl=0

You will be shown a configuration dialog the first time you run the program.  You will only be shown available COM ports.  Be sure to select the COM port to which the DTS-4 is connected.  You can name the antennas in the text boxes provided.  Select the antenna number you want to be the default antenna.  This antenna will be selected each time you run DTS-4.  Once running, change antennas by selecting the new antenna desired.  All the antennas can be grounded by selecting "Ground All".

Once configured you will see a much reduced window each time you run DTS-4.

You can later change the setup by clicking on the pull-down next to Help and selecting Configure DTS-4.  All of your selections are saved in the System Registry.  To remove these entries, click on Help and Uninstall.

Direct any questions or comments to W4UOA.  My email is good on QRZ.

73,
W4UOA

Cincinnati Remote

Interface on FT-2000D

John's new beach QTH!

Actually the beautiful Pearl Beach QTH of 9K2UU.  More pictures available on QRZ.