You heard it on WWV!

Really!?

VoIP HF Bridge

(Click on the image to enlarge)

This is a pictorial representation of a recently tested Skype-based amateur radio HF VoIP bridge station. Working with well developed and tested component elements: Skype and a radio computer interface were linked to provide a HF VoIP bridge--somewhat similar to Echolink. Recent tests found that given sufficient Internet bandwidth, and a relatively robust computer to serve as the conference hub, Skype can provide exceptional audio between all participating stations.

In the most recent trials, the HF tranceiver was set for VOX operation thus allowing conference participants to easily key the transceiver. This easy access does require some discipline to minimize doubling on the part of conference and on-air participants.

On-air participants reported excellent audio quality and no objectionable latency. Obviously the readability of the on-air signal will depend on the power of the HF bridge station and propagation conditions between on-air participants and the HF bridge station.

A special thanks to WA5MLF and W4BXI for many suggestions and encouragement.

June 18, 2010

ARRL just released their first Remote Operating for Amateur Radio.  I was impressed by their first figure!  See below.

Well, gosh.  I guess that's just about the only way you could draw it!  I'm just glad they are promoting a great idea.  Hats off to TRX-Manager, HRD, and a host of other innovative programmers who have made it all possible!

HF via Echolink

Several of us have been working to setup an Echolink server to facilitate an early morning HF round-table when 75m propagation is not particularly good for all stations. The following screen shots show the current state of affairs. You can click on each image to seen a full size rendering.

The above screen shot shows the microKeyer audio routing necessary for COM port or Winkey PPT. Note that this configuration is called a "C" type of routing.

The following screen shot shows the required port configuration. Note that the PTT port is set to COM4. We'll see that COM4 setting again when we look at a the Echolink PTT setup.

See the Echolink Preferences-Connections-Push-to-Talk Settings below. Note the Serial Port COM4 selection.

Echolink inbound audio (RXCtrl) is set to VOX as shown below.

Echolink out-bound (TX-Ctrl) is also set to COM4 as shown below.

And lastly, Echolink must be told where to find the in-bound (Rcv) and out-bound (TX) audio. In this case, the sound card as shown below.

Configuring this particular installation was complicated by the the interface (microKeyer) choices audio routing and possibilities and transmitter keying, coupled with a number of different parameter choices in Echolink.

I'm not sure we are yet properly configured but I think we are closer.

Grounding Project

Each leg of the tower is grounded to an 8' ground rod. The rods are tied to each other.

One of the three 8' ground rods.

Looking up from the base of the tower to the entry panel. Note the feed lines come off the tower at roof line and go directly to the entry panel.

The entry panel. Note the ground wire. This runs down a leg of the tower and is tied to one of the ground rods.

Feed lines from the UHF, Beam, and Fan dipole. The fan dipole goes to the connector labeled beam--go figure!

Note the tower sits just to the right of the guest bedroom. Can you guess what I'm think?

Alabama QSO Party

I used the N1MM logging program. After a bumpy start, Mickey Mouse worked great. With all the testing, I did not confirm that I could enter state abbreviations. Some how I managed to break this feature. After almost an hour all was working.

Of the many nice features, the ability to record and manage voice keying was very handy. While I setup wav files for several different transmissions, the one I really used was the CQ call. Just hit the F1 key and the station called CQ. All I had to do was log the contacts!

The dual monitors allowed me to watch many of N1MM's windows. The paper in front of the keyboard includes a conversion for county names to 3 or 4 character abbreviations; two-character USPS abbreviations; and a copy of the rules!

73,
W4UOA

Alabama QSO Party

Alabama QSO Party starts at 11:00AM CST, Saturday, June 7th. I've never been a contester but am going to give it a try this year. I'm going to use the logging program N1MM with digital voice. I've recorded all the messages and setup the layout. More on the results after the weekend! Click on the picture of a larger image.

Omni VII HF+6m Transceiver

OMNI-VII is the first truly Net-Ready ham transceiver. No PC required at the rig to operate remote! Locate your OMNI-VII anywhere you have wideband Internet access. Simply connect its built-in Ethernet port to your router with our exclusive One Plug connection. Delivers live receive AND transmit operation from anywhere else in the world from another wideband Internet access!

Click on the picture for a hi-res image.

K4ZGB -- Tom Hardison

I spent a couple of hours at Tom's QTH this afternoon. What an amazing place! The antenna farm is fantastic and he has built a magnificent shack in his basement. There is no way my pictures can do this QTH justice, but I had to try. Click on any image to see a larger hi-res version. Let's start in the shack.



I hope Tom will forgive me but I didn't tell him I was coming and wouldn't let him "clean up" the shack. We all like a working shack anyway Tom! What you see is what we all want...an open horse shoe with easy access to every piece of equipment including the back! No, I'm not jealous! Right!

Take a close look at this one. You know it's not feed line...you guessed it...some serious antenna control. Don't get in a hurry. We'll get there! Look at the attention to detail. You can tell Tom knows how to do it right.


Count the feed lines on this next one. Now you begin to get a better understanding of what is to come!


Ok...so there is something BIG outside. For a hint on just how big, let's take a look at one of the anchors!



So, where does it begin?



Wow, the rotor is on the wrong end!! Well, you've seen it in the magazines, here it is on the ground...and in the air! This great tower will NOT fit on one computer screen so...click on the image and scroll up and down, count the stacks and the number of bands you think this tower can work!


One more for today. How would you like to have an 80m vertical that does not need to be electrically lengthened and has an SWR of 1.3 across the band! Well...this is what the base would like.



And from a distance!



Thanks for a great visit Tom! All the pictures can seen on PicasaWeb.

Intermodulation Distortion and IP3

John Krupsky, John Drum and I recently prepared a Power Point presentation on Intermodulation Distortion and the third order intercept point (IMD-IP3). This link includes sound. The file is rather large at 11MB. We invite you comments.

IMD IP3 Presentation

Station Back Together

UHF/VHF rig and rotor control are now in place. TRX-Manager, shown on the right-hand screen, provides rig control for the FT-1000MP Mark V, an Internet web cluster pane, logbook, and rotor control. The VL-1000 linear, above the Mark V, provides antenna switch between a 80/40 meter dipole and a 3-element yagi. The Palstar tuner is used primarily for 60 meters when the dipole is used with a Marconi adapter.

Software Defined Radio (SDR)

For those of you interested in SDRs, WA5MLF and I have started a new SDR Blog. We've purchased a small SDR receiver and will keep you posted as we learn more about this rather amazing new aspect of amateur radio. New to us that is, not to a lot of other good folks!

The fate of all who live in an imaginary world....

Dynamic Range and 3rd Order Intercept Point

This is a graph showing the foundational elements used to establish a receiver's dynamic range.

Intermodulation Distortion and IP3

John Krupsky, WA5MLF; John Drum, W4BXI; and Carl Ferguson, W4UOA have prepared a Powerpoint presentation on Intermodulation Distortion and 3rd Order Intercept Points for the Tuscaloosa Amateur Radio Club. Click on the hyperlink to view or download the presentation.

Carl Sagan Remembered

Carl Edward Sagan (November 9, 1934 – December 20, 1996) was an American astronomer and astrochemist and a highly successful popularizer of astronomy, astrophysics, and other natural sciences. He pioneered exobiology and promoted the Search for Extra-Terrestrial Intelligence (SETI).

He is world-famous for writing popular science books and for co-writing and presenting the award-winning 1980 television series Cosmos: A Personal Voyage, which has been seen by more than 600 million people in over 60 countries, making it the most widely watched PBS program in history.^[1] A book to accompany the program was also published. He also wrote the novel Contact, the basis for the 1997 Robert Zemeckis film of the same name starring Jodie Foster. During his lifetime, Sagan published more than 600 scientific papers and popular articles and was author, co-author, or editor of more than 20 books. In his works, he frequently advocated skeptical inquiry, humanism, and the scientific method. (Wikipedia)

Please take a moment to enjoy one of his master works, "The Pale Blue Dot".

Carl Sagan's "Cosmic Calendar" was first shown on his PBS series "Comos" a most amazing program.
The theme song from "Comos" follows the "Cosmic Calendar".

Play the following clip to hear all of the theme song to "Comos".

Software Defined Radios

With the launch of FlexRadio, the amateur radio community is beginning to pay serious attention to the concept of software defined radios. Many of us, like myself, are VERY late-comers to this most fascinating topic.

With special thanks to WA5MLF for calling these to my attention, let me suggest for those of you interested in learning more, check out the four-part series by Gerald Youngblood, AC5OG. They were published in the Jul/Aug 2002 edition of QEX.

SDR Part 1 - SDR Part 2 - SDR Part 3 - SDR Part 4

WA5MLF has also pointed out a very good general discussion of software defined radio on Wikipedia.

Dual Monitor Display Close-up

This is a screen shot of the dual-monitors showing TRX-Manager and DXAtlas. Click on the picture for a hi-res image. TRX-Manager provides rig control for the FT-1000 Mark V; logbook; web cluster; rotor control; and quick access to memory channels. The left monitor can be shared with DXAtlas grayline, Chatroom, e-mail, etc.

Dual Monitors

I think I'm going to really like the new dual-monitors. They are at just the right height and provide a lot of space for a variety of applications. Cable management still leaves a little to be desired. That will come in time! Hi!

Click on the picture for a hi-res image.

Cleveland Deck Project

My son and I added a deck to the back of his house July 2007.

Why are 3rd Order Intercept Points of Interest: A Continuing Discussion

Click on the pictures for a hi-res (and readable) image.

Use your browser's back arrow to return to this page.

A Look Around the IC-7000

Click on any picture of a hi-res image.

Sunset at W4UOA

The tower immediately after taking down the rotor for repair. Click the picture for a hi-res image. Use your browser button to get back to this page.

The two videos below show The Gadget used to keep the mast stable when I took the rotor down for repair following a lightening strike. The first video shows The Gadget attached with the rotor still in place--the second after the rotor has been removed. Click on the ">" to play the videos. Thanks to David Drummond for the idea.

Bell Ringers Net, December 15, 2007

A sample of conditions today on 7.230. Click on the play arrow ">" at the bottom left to listen to the net and see the audio recording. This is a 20 minute segment of the net. You can move the slider at the bottom of the image to move toward the end of the recording and "sample" band conditions over this period.

For you contesters!

Do NOT miss this if you are a contester!

Join us on the airwaves...

If you have not seen this video...take a moment for big smile! Quoting from their web site,
"Yes, Andrew really is at the top of the 100 foot tower singing the song, and Lissa is really up at 66 feet singing the harmony vocal!"

IC-7800

I thought you might enjoy seeing the new IC-7800 close-up. Click on the image for large, hi-res image.

The following came from eHam:

I bought this radio over the summer and after about 2 weeks of operating, the finals blew (while running about 60W out into my Acom amp.) Apparently, this is a fairly common problem, discussed regularly on the 7800 email list. I know of 2 other radios that blew their finals the same day as mine! Rumor has it that Icom had a bad batch of transistors, though the official word is they still are trying to figure it out.

I sent the radio back to Icom (via UPS ground, for about $200) and got it back about 3 weeks later. So far, so good.

Any radio can have a problem, so why did I give it a 2? Besides the quality control problem, a 10K radio should be near perfection. This isn't. Operationally, weak signals on the noisy lowbands are easier to copy with my FT-1000D. The APF is significantly better on the Yaesu. The 7800's DSP doesn't help. Ergonomically, I find the AF gain knob uncomfortably close to the Mic jack. Also, the M=S button (to set VFO B equal to VFO A) is too close to the main tuning knob and it's tough to press it without changing frequencies. In case you're wondering, I don't have fat, clumsy fingers - I'm an eye surgeon.

Regarding service, I feel Icom should have paid for shipping, given the frequency of this problem with the 7800. They shouldn't sell a Lexus and provide Ford Escort service! If the Elecraft K3 lives up to its hype, I'll probably sell this radio and get the K3.
W2UP

QSO with W4BXI

This blog post explores another way to post videos. You will notice the SX-115 video in the right margin. Here, the QSO with W4BXI is embedded into a blog post using the Youtube inline code. Notice the picture image is larger than that seen on the right margin and the run-time video is also larger. When the video finishes, the full image is also left on the screen.

To play the video, click on the Play Button in the center of the image. If you click on the picture itself, you will link to the video's home on You Tube.

Marconi Adapter

This is the Marconi adapter and its connection on the back of the tuner. The theory can be seen in that that the shield and the center conductor are both terminated on the wire connector of the tuner. The antenna, a traditional half-wave dipole, then acts as a single wire with the station ground providing the "other side" of the circuit. The feed line is connected to the adapter by a female RG-8 connector.

The adapter has worked well so far. Good signal reports from Birmingham, West-Central Mississippi, and Georgia. Time will tell just how well it "hears".

73,
Carl